NXT-150 - What do the lights mean?
PrintTables can't be imported directly. Please insert an image of your table which can be found here.
Problem
Led
Card Type
Solution
No problem
Red light flashes shortly, then green light on
All opening cards
Time error
Red light flashes
Guest card, Floor card, Staff card
Adjust lock time and make card again.
Deadbolt extends
Red light flashes
Guest card, Floor card, Staff card
Check if red light flashes each 3 seconds or use a Master Card to open.
Retract deadbolt to solve the problem.
Wrong building, floor, or room number
Red light flashes
Guest card, Floor card, Building card
Read room creation card again and make new opening cards.
Card is canceled
Red light flashes
All cards
Read “Recovering card” to make the card valid again.
Card password error
Red light flashes
All cards
Card is probably not initialized.
Customer code error
Red light flashes
All cards
Software and lock read different Authorization Cards.
Room number is not cleared
Red light flashes
Room creation card
Read “Room info clearing card” before reading “Room creation card”.
Card is replaced
/blocked
Red light flashes
All cards except Guest Card, Time card, Room creation card
Make card again and check “Block previous cards”
No card detected
N/A
All cards
Check if the lock sensor works, especially if the solenoid inside is not broken.
No card detected
Red light flashes
All cards
Put the card closer to the lock.
Authorization card error
Red light flashes
All cards
Turn mechanical key and read Authorization Card again.
Motor damage
Red light flashes shortly, then green light on
All opening cards
Disassemble the lock and change the motor
